Gree GC201306 -1 Service Manual page 61

displayed.
13) LIGHT
Press LIGHT button to turn on the display's light and press this button again to turn off the display's light. If
the light is turned on, is displayed. If the light is turned off,
3.5.2 Introduction for special Operation
1) Child lock function
Press ＋ and － buttons simultaneously can turn on or turn off child lock function. When child lock
function is started up, "
times, while remote controller won't send signal.
2) Switchover function for temperature display
After turning off the unit by remote controller, press "-" button and "MODE" button simultaneously to switch
between ℃ and °F .
3.5.3 Guide for General Operation
1) After putting through the power, press "ON/OFF " button on remote controller to turn on the air
conditioner.
2) Press "MODE" button to select your required mode: AUTO, COOL, DRY, FAN, HEAT.
3) Press "+" or "-" button to set your required temperature. (Temperature can't be adjusted under auto
mode).
4) Press "FAN " button to set your required fan speed: auto, low, medium and
high speed.
5) Press " " and "
"icon will be displayed on it. If operate remote controller, "
" button to select fan blowing angle.
disappears.
" icon will flash three
Super Free Match
Service Manual
57 CONTROL