Gree GC201306 -1 Service Manual page 60

Super Free Match
Service Manual
When the unit operates under X-FAN mode, press "X-FAN" button can turn off X-FAN function.
Indoor fan stops operation immediately.
9) TEMP
Press this button can see indoor set temperature, indoor ambient temperature or outdoor ambient temperature
on indoor unit's display. Temperature is set circularly by remote controller as below:
When selecting "
set temperature.
When selecting "
ambient temperature.
When selecting "
ambient temperature.
Note:
Outdoor ambient temperature display may can't be selected for some models. When indoor unit receives
" " signal, it displays indoor set temperature.
Only for the model whose indoor unit has dual-8 display.
10) TIMER
At ON status, press this button once can set TIMER OFF. The character of HOUR and OFF will flash.
Press "＋" or "－" button within 5s can adjust the time of TIMER ON. After each pressing of "＋" or "
－" button, time will increase or decrease half an hour. When holding "＋" or "－" button, 2s later,
the time will change quickly until to reach to your required time. After that, press "TIMER" button to
confirm it. The character of HOUR and OFF won't flash again. Cancel TIMER OFF: Press "TIMER"
button again under TIMER OFF status.
At OFF status, press this button once can set TIMER ON. Please refer to TIMER off for detailed
operation.
Cancel TIMER ON: Press "TIMER" button again under TIMER ON status.
Note:
Time setting range: 0.5-24 hours.
Time interval between two operations can't exceed 5s. Otherwise, remote controller will exit the setting
status automatically.
11) TURBO
When pressing this button under cooling or heating mode, air conditioner will enter into quick cooling or
quick heating mode. The character of "TURBO" is displayed on remote controller. Press this button again to exit
turbo function and the character of "TURBO" will be disappeared on remote controller.
12) SLEEP
Press this button under cooling, heating mode can start up sleep function. "
remote controller. Press this button again to cancel sleep function. "
CONTROL 56
" by remote controller or no display, temperature indicator on indoor unit displays
" by remote controller, temperature indicator on indoor unit displays indoor
" by remote controller, temperature indicator on indoor unit displays outdoor
" icon will be displayed on
"icon on remote controller will be