Gree GC201306 -1 Service Manual page 52

Super Free Match
Service Manual
Note: It's Low fan speed under Dry mode.
4) TEMP
Press this button, the following temperature can be set circularly: the setting temperature, indoor ambient
temperature and outdoor ambient temperature. When the indoor unit firstly power on, it will display the setting
temperature
outdoor ambient temperature. 5s(3s) later it will return to the setting temperature or it depends on the other
received signal within 5s(3s).
Note: Outdoor ambient temperature display range is 0~60℃ (32~99℉). As for the outdoor ambient
temperature below 0 it displays 0℃(32℉).
"
" function is applicable to partial of models.
Warm tips: When operating buttons on the cover, please make sure the cover is closed completely.
5) CLOCK :
Press this button, the clock can be set up, signal
adjusted by pressing ＋ or－ button, if continuously press this button for 2 seconds above, in every 0.5seconds,
the value on ten place of Minute will be increased 1. During blinking, repress the Clock button or Confirm button,
signal will be constantly displayed and it denotes the setting succeeded. After powered on, 12:00 is
defaulted to display and signal
time value is Clock value, otherwise is Timer value.
6) LIGHT:
Press LIGHT button at unit On or Off status, Light On and Light Off can be set up. After powered on, Light
On is defaulted.
7) TURBO:
Under Cool or Heat mode, press this button can turn on or turn off the Turbo function. After the Turbo
function turned on, the signal of Turbo will display. The signal will be automatically cancelled if changing the
mode or fan speed.
8) X-FAN:
Pressing X-FAN button in COOL or DRY mode, the icon
operation for 10(2) minutes in order to dry the indoor unit even though you have turned off the unit. After
energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO, FAN or HEAT mode.
9) ＋：
Presetting temperature can be increased. Press this button, the temperature can be set up, continuously press
this button and hold for two seconds, the relative contents can quickly change, until unhold this button and send
the order that the ℃(℉) signal will be displayed all the time. The temperature adjustment is unavailable under
the Auto mode, but the order can be sent if pressing this button. Temperature of Celsius degree setting: 16-30;
CONTROL 48
Low fan
Medium-High fan
. If the displaying status is changed to
will be displayed. If there is signal
Low-Medium fan
, displaying the indoor ambient temperature.
blink and display. Within 5 seconds, the value can be
is displayed and the indoor fan will continue
Medium fan
High fan
be displayed that denotes the current
is the