NewTek 3play User Manual page 54

Figure 28
16) ESC: Abort a current MARK IN or supply a negative response to an open dialog panel;
equivalent to the keyboard Esc key.
17) Num Pad 0-9: Type the ID# of an event using these buttons, then press ENTER to select the
event.
18) ENTER: Confirm a numeric entry (jumping to the desired event by its ID#) or send an
affirmative response to a open dialog panel.
19) SHIFT: A qualifier button to allow multi-selection of events in a tabbed list (keep Shift
depressed while pressing an Arrow (Up/Down) button; equivalent of the keyboard Shift key.
20) Arrow (Up): Move current position in Event List up; equivalent of the keyboard Up Arrow key.
21) Arrow (Down): Move current position in Event List down; equivalent of the keyboard Down
Arrow key.
13) RMV (Remove): remove the selected Event
List entry (or entries).
If an entry is removed from a colored Custom
List tab, it will no longer appear in the Master
List either. Likewise, events removed from
the Master List are removed from any colored
tabs they were assigned to.
14) CLN (Clone): create a duplicate event, which
will be placed below the existing one in the
list.
15) <TAB and TAB >: cycle through the Event List
tabs in a left or right direction.
ALT + < TAB/TAB >: cycle the color
assignment for selected events through the
custom tab colors (Master tab only). All
selected clips are assigned a single color. For
multi-selections that are different colors, color
cycling begins with the color of the last
selected clip.
Page 48