Setting Up; Command And Control - NewTek 3play User Manual

4

SETTING UP

To begin, let's review what is 'in the box':
1. 3P system
LAY
2. 3P-10 Control Surface and USB cable
3. Keyboard and Mouse
4. A/C power cord
5. 3P Reference Manual
LAY
6. 3P Quick Start Guide
LAY
7. Registration reminder card
4.1

COMMAND AND CONTROL

1. Connect an external computer monitor to a DVI or VGA port on 3P
(whichever port is appropriate for your monitor connection type).
Note: As a minimum, 3P
interface.
2. Connect keyboard and mouse to appropriate ports on 3Play's back plate.
3. Likewise, connect the 3P-10 control surface to a USB port.
4. Connect the A/C power cord from the three-prong connection on 3P
external power receptacle.
5. Turn on the computer monitor.
6. Press the Power switch located on 3P
This chapter explains how to properly connect power, external
control devices, monitors and audio visual sources to your NewTek
3P ™ system.
LAY
It also reviews registration for warranty purposes and technical
support. After completing this short section, you'll be all set to
continue into the Quick Start chapter that follows it.
requires a Screen resolution of 1280 x 768 pixels for its user
LAY
's lower front.
LAY
Page 15
s's back plate
LAY
's rear to an
LAY