Alt; Jump - NewTek 3play User Manual

5) Camera 1, 2 & 3 buttons:
b) Press to place the corresponding stream on the Main Output monitor. (For 1-Out mode,
this also sets the primary stream).
Hint: This produces the same result as clicking one of the three Output Stream
monitors on the 3P
c) Press ALT + Camera (1, 2 or 3) to place Live playback of the designated Camera on Main
Output.
d) Press Shift + Camera (1, 2 or 3) to set the Camera for the selected event (just as clicking a
button in the Event List's Camera column does). This change does not affect playback
already in progress, however.

6.2.5 ALT

6) ALT (Figure 25): Press in combination with other 3P-10 buttons as specified to provide
optional functions.

6.2.6 JUMP

7) -2 Sec, -1 Sec, +1 Sec, +2 Sec buttons: When pressed, the frame on output "jumps" backward
or forward correspondingly.
The Jump buttons move the current play position to a different timecode in measured increments.
Naturally this action affects all associated video streams simultaneously. (If a 'jump' is executed
while stopped, playback re-commences at the current frame when Play is pressed.)
Note: if you 'jump' during playback, playback automatically resumes from the 'jump position'.
Desktop.
LAY
Page 44