Start Engine; Stop Engine; Passenger; Break-In - Joyner Renegade R2 Owner's Manual

Start engine

1 Engage the parking brake if necessary.
2
Pressing down the clutch pedal can make starting easier, so do that if necessary.
3 Make sure the shift lever in neutral position.
4 Turn the key clockwise to the "start" position and hold it for less than 5 seconds, if engine not
started. Repeat it until the engine is started. Release the key and the clutch pedal when the
engine starts. Keep engine running for 1-2 minutes before driving.
Do not attempt to start or operate the engine until completely familiar with the location and use of
each control necessary to operate this vehicle. The operator must know how to stop this machine
before starting and driving.
Each time prior to starting the engine, check the throttle assembly to ensure that when pedal is
pushed all the way forward the assembly is working smoothly and returns to idle when released.
Do not operate if pedal or engine throttle linkage fail to return to idle. If unable to correct the
problem through lubrication, adjustment or replacement of worn parts, contact your dealer for
assistance.
Before you start the engine, check that the parking brake is engaged, and the gear shift lever is
in neutral. Trying to start the engine in gear may damage the starter motor, clutch or gearbox.
Release the key at once if the engine starts. Holding the key in start position when the engine is
running will cause damage to the starter motor.
If the engine does not start after 5 seconds, a second attempt to start the engine can be allowed.
Improper operation will damage the engine

Stop engine

1 It is strongly recommended to stop vehicle before stop engine.
2 Make sure the shift lever in neutral position.
3 Turn the key clockwise to the "off" position.
Before driving this vehicle, test the Engine Stop key to assure that it is operating properly.

Passenger

The vehicle allows for two riders only.
The passenger should wear seat belt all the time.

Break-in

The first month is most important in the life of your vehicle. Proper operation during this break-in
period will help assure maximum life and performance from your new vehicle. The following
guidelines explain proper break-in procedures.
1. After the engine starts, the engine is not allowed in high speed in the neutral gearshift.
.
38 / 278