Table of Contents
Advertisement
upward, hold the lever in that position and adjust the seat to the desired position. Be sure the
adjustment lever is back on its full lock position and the seat is locked in place.
1.
Pull seat lock lever under left leg upward.
2.
Move the Seats backwards or forwards as your need.
3.
Release the lock lever, so the Seat is locked in the position you want.
To access the battery compartment the compartment is located under neath the passenger seat the
seat can be lifted in the same manner the cargo bed. Just unlock the quick release latches located in
the back of the seat.
1.
Remove the safety belt hooks connecting to the hoops bolted on the frame.
a) Press the limiting rock, make a space between the hook and the hoop.
b) Take off the hook.
2.
Repeat step 1, take off these hooks behind seat and both sides of seat.
3.
Unlock the seat locker under the seat.
4.
Turn the seat until it is stopped by steering wheel.
Seat belts
Your Renegade is equipped with five-point seat belts for both driver and passenger. Always wear the
seat belt while riding in the vehicle. To wear the seat belt properly, do the following:
1
Insert the each belt though the belt hole in the seat, and hitch the bracket to the hoop, but the
middle belt is fastened to seat mount together by bolt, nut and washer, see Pic6.24-Pic27.
2
Hold the latch plates as you pull the belts across right shoulder, left shoulder, right leg, left leg and
among two legs. Make sure the belt is not twisted and is not caught on any portion of the vehicle,
your clothing, or any equipment you are carrying, see Pic 6.28-. Pic 6.29
36 / 278
Advertisement
Table of Contents
