Joyner Renegade R2 Owner's Manual page 26

■ Leaks, Loose Parts
Walk around your Renegade and look for anything that appears unusual, such as a leak or loose
cable.
■ Light
Make sure the headlight, brake light, turning light and tail light are working properly.
■ Throttle pedal
Check the free play of throttle pedal and adjust if needed. Press the throttle pedal to make sure it
moves smoothly without sticking, and snaps back automatically when it is released.
■ Clutch pedal
Check the free play of clutch pedal and adjust if needed. Press the clutch pedal to make sure it
moves smoothly without sticking, and snaps back automatically when it is released.
■ Brake pedal
Press the brake pedal several times, check for proper brake pedal free play. Make sure there is no
brake fluid leakage.
■ Engine stops
When engine is running, turn the switch key counterclockwise. Make sure engine stops.
■ Steering wheel
Check that the wheels turn properly as you turn the steering wheel.
■ Cable
Check the cable housing for wear. Check the fittings are tight. Replace or tighten as needed.
■ Tie rod
Check the tie rod housing for wear. Check the fittings are tight. Replace or tighten as needed.
26 / 278