Start Engine - Joyner JNSZ650UV4S Owner's Manual

Improper operation of the clutch will lead to excessive wear of the clutch friction surface.
Note：
When operate the vehicle, if it does
not feel comfortable about one of the
three pedals , adjust the bolt and then
tighten the nut until it feels very
comfortable.

Start engine

1. Engage the park brake
2. Press the clutch pedal down,
put the shift lever in neutral.
3. Insert the key into the main switch
If the engine is cold, do the following:
1. Pull the choke out fully.
2. Press down the clutch pedal.
3. Turn the key clockwise to the "on" position. Release the key and the clutch pedal
when the engine starts.
4. Push the choke back slowly to allow the engine to run smoothly. Keep engine
running for 1-2 minutes.
5. Push the choke back fully. If the idle of engine is not smooth, pull out the choke
to find the best running position and keep running for a while long until the engine
running smooth without choke.
40