Operation Instruction; Main Electrical Kill Switch; Ignition Switch - Joyner Renegade R2 Owner's Manual

Main electrical kill switch

The main electrical kill switch controls the overall power of your Renegade. It is fastened to the main
frame under the hood for the old dash, see Pic 6.1.To the new dash it locates the middle.
1. Before start the engine, please insert the key and turn it clockwise and check the circuits.
2. While vehicle working, never turn the key off.
3. If some exigency happens about the circuits, shut down the switch first.
4. If lose the key, please connect your local JOYNER dealer.
It is important to your renegade and yourself safety for the main electrical kill switch to control the
overall power, so keep it clean all the time.
When do not ride your Renegade for a long time or store it, please turn the key off.

Ignition switch

See Pic 6.3, functions of the respective switch positions are
as follows:
OFF:
All electrical circuits are switched off except the turning light
both the left and the right when the light switch is on.
The key can be removed in this position.
ON 1:
All electrical circuits are supplied with power, except
the ignition system and fuel system, the headlights and
taillights come on when the light switch is on.
ON 2:
The ignition system and fuel system are supplied with power.

6 OPERATION INSTRUCTION

27 / 278