Preparation Attach Instruction; Attach Battery - Joyner JNSZ150DS Owner's Manual

PREPARATION ATTACH INSTRUCTION

STEP 1:FILL THE ELECTROLYTE AS BELOW
a) Pull the seal cap out of the plastic bottle
b) Turn over the seal cap 180 degree, fix it on the outlet of plastic bottle
c) Cut the inlet of plastic bottle
d) Fill the battery with electrolyte to upper lever by inserting every inlet of
the battery
STEP 2:Put the battery into the box on go-kart.
STEP 3:Connect the wire to battery as below picture; red to "+", black to
"-".
STEP 4:Fix the battery cap, rubber cushion and tighten both bolts and nuts.
Notice:
Before use new battery, it need to notice follows;
1- After the battery is filled electrolyte, the new battery need to recharge as the
Owner's manual said. Otherwise, the new battery will be damaged and can't
recharge.
2- The new battery can't overload in use, otherwise it damage forever.
3- The new battery need to maintenance with recharge as the Owner's manual
said.
65

ATTACH BATTERY