VoiceFinder AP100 VoIP Gateway Installation Guide (Edition 1.0)
Rear View of AP100
The rear panel of AP100 VoIP gateway has the 10/100Mbps Fast Ethernet interface port for
WAN/LAN, and phone interfaces for voice processing, and allows you to configure a network for
WAN-to-LAN routing services.
Standard Configuration Model
The figure below shows the exterior of the rear panel:
The rear panel of the standard setup model of AP100 VoIP Gateway is described in the table below.
(The configuration may vary depending on models.)
No.
LED
PHONE
①
SW
②
DC Input
③
LAN0
④
LAN1
⑤
AddPac Technology Proprietary & Documentation
[Figure 1-4] Rear Panel of VoiceFinder AP100 VoIP Gateway
Description
FXS voice interface I/O port that allows you to connect a regular
phone or a facsimile (RJ11)
Switches that supply or block the power to the system
Connects to the external adapter of 5V 2A to supply power.
10/100 Mbps Ethernet interface for WAN connections (RJ45)
10/100 Mbps Ethernet interface for LAN connections such as Direct
PC connection (RJ45)
[Table 1-2] Rear Panel of VoiceFinder AP100 VoIP Gateway
40 - 17