EXTERIOR LIGhTING AND sIGNALs
1
á
Main beam headlights
When the dipped beam head-
lights are lit, pull stalk 1 towards you
(an indicator light on the instrument
panel lights up).
To return to the dipped beam headlight
position, pull the stalk towards you.
switching off the lights
e
Return the stalk to its original
position.
1.60
(continued)
Lights-on warning buzzer
A warning buzzer will sound when the
driver's door is opened and the lights
are left on after the ignition has been
switched off (to prevent the battery run-
ning down, etc.).
Before driving at night,
check that the electrical
equipment is in good con-
dition and adjust the head-
light beams (if your vehicle is not
carrying its normal load). Check that
the lights are not obscured (by dirt,
mud, snow or objects which could
cover them).