Roof Bars - Renault TWINGO Driver's Handbook Manual

RooF BARS

2
3
1
Accessing the mounting
points
Open the doors. Behind seal 2 are
blanking bolts 1 which protect the
mounting bolt locations.
Never remove blanking
bolts 1 without plugging the
holes afterwards.
When fitting roof bars, at the front of the
4
vehicle, replace the blanking bolts with
the mounting bolts supplied with the
roof bars. Behind seal 3, position the
roof bars in the reinforced area 4 pro-
vided.
Once they are secured on
to the vehicle, the mount-
ing bolts should never be
removed (risk of damaging
the vehicle).
If original roof bars, approved by our
Technical Department, are supplied
with screws, only use these screws
for attaching the roof bars to the ve-
hicle.
For information on the range of
equipment adapted to your vehi-
cle, we advise you to consult an ap-
proved Dealer.
Refer to the fitting instructions for in-
formation on how to fit roof bars and
conditions of use.
Please keep these instructions with
the rest of the vehicle documenta-
tion.
Maximum permissible load on
roof rack: refer to the information
on "Weights" in Section 6.
3.39