EXTERIOR LIGHTING AND SIGNALS
Main beam headlights
With the dipped beam head-
lights lit, pull stalk 1 towards you.
When the main beam headlights are lit
up, an indicator light lights up on the in-
To return to the dipped headlight posi-
tion, pull the stalk towards you again.
'See-me-home lighting' function
This function (useful, for example, for
opening a gate, a garage, etc.) enables
you to switch on dipped headlights mo-
With the engine switched off and the
lights off, the end of stalk 1 in
position 0, pull stalk 1 towards you: the
dipped beam headlights light up for ap-
proximately thirty seconds.
This action may be carried out no more
than four times for a maximum lighting
period of two minutes.
To switch off the lights before they go
out automatically, turn the end of stalk 1,
then return it to position 0.
Switching off the lights
There are two possibilities:
– return stalk 1 to its original position;
– the lights go out when the engine
is stopped, when the driver's door
is opened or when the vehicle is
locked. In this case, the next time
the engine is started the lights will be
switched back according to the posi-
tion of the stalk 1.
Automatic operation (depending on
The lights go out when the engine
is stopped, when the driver's door is
opened or when the vehicle is locked.
Lights-on reminder buzzer
If the lights are on after the engine is
switched off, a warning beep sounds
when the driver's door is opened to
warn you that the lights are still on.