Direction Indicator Lights - Renault TWINGO Driver's Handbook Manual

HeADLIgHtS: changing bulbs
1
A
Main beam/dipped headlights
Note the correct positioning of the har-
nesses 5 before removal in order to po-
sition them correctly when refitting.
To return it, proceed in the reverse
order to removal.
It is recommended that the headlights
be adjusted after this operation.
(continued)
2
6
3
5
– Unclip cover A and remove it;
– disconnect bulb 2 and remove the
springs 6;
– remove the lamp from the connec-
tor.
type of halogen bulb: H4 60/55 W
Do not touch the bulb glass. Hold it
by its base.
During fitting, note the correct fitting of
the tabs 3.
The bulbs are under pres-
sure and can break when
replaced.
Risk of injury.
Front side light
– Unclip cover A and remove it;
– remove bulb holder 4 from its hous-
ing without pulling on the cable;
– change the bulb.
3
Bulb type: W5W.
4

Direction indicator lights

Rotate bulb holder 1 a quarter of a turn.
Change the bulb.
Bulb type: PY21W.
For refitting, ensure the bulb holder is
correctly locked.
The engine may be hot
during operations in close
proximity. In addition, the
engine cooling fan may
start at any moment.
Risk of injury.
5.15