Rear Seats: Functions - Renault TWINGO Driver's Handbook Manual

REAR SEATS: functions

2
1
3
To fold down the rear seats
The seats can be folded down in order
to transport large objects:
From the front, lower the headrest.
From the rear, lift handle 2 to fold down
the seatback, lower bar 1 of the seat
concerned and move it forwards fully.
Lift the controls 3 located either side
of the seat and lift the seat against the
front seats.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
3.32
Tension wheels 4 located under each
of the rear seats are used to keep the
seats folded down.
Unhook the tension wheel from ring 5
and hook it to the rods on the headrest
in front.
To return the seats
Unhook retainer 4 from the headrest
rods, and stow it by hooking it into
ring 5. Lower the seat until it is approxi-
mately 10 cm from the floor then re-
lease it. The seat positions itself under
its own weight. Raise the seatback and
ensure the seat is correctly locked.
When refitting the seat-
back, make sure it is cor-
rectly locked in place.
If seat covers are fitted,
make sure these do not prevent the
seatback latch from locking in.
Make sure that the seat belts are
positioned correctly.
Reposition the headrests.
4
5
When tilting the seats, be
careful not to lock the seat
belts. If this happens, tilt
the seat again. Pull the belt
strap, reposition the seat and re-
lease the strap.
When moving the rear
seats, ensure that nothing
obstructs the anchorage
points (passenger's arm or
leg, a pet, gravel, cloth, toys, etc.).