Renault TWINGO Driver's Handbook Manual page 65

EXTERIOR LIGhTING AND sIGNALs
1 2
k
Dipped beam
headlights
Manual operation
Turn the end of stalk 1 until the symbol
is opposite mark 2.
An indicator light on the instrument
panel will come on.
Before driving at night, check that the electrical equipment is in good condition and adjust the headlight beams (if your
vehicle is not carrying its normal load). As a general precaution, check that the lights are not obscured (by dirt, mud,
snow or objects which could cover them).
(continued)
Automatic operation
With the engine running on vehicles
fitted with a light sensor, the dipped
beam headlights come on automatically
as light begins to fade; the stalk does
not need to be turned (position 0).
To deactivate or reactivate this function,
move the end of stalk 1 twice consecu-
tively from 0 to side light position, with
the vehicle stopped and the ignition on.
A bleep confirms the deactivation of this
function, and two bleeps confirm its re-
activation.
see-me-home lighting feature (de-
pending on vehicle)
This function (useful, for example, for
opening a gate, garage, etc.) enables
you to switch the dipped headlights on
momentarily.
With the ignition off and the headlights
off, pull stalk 1 towards you: the dipped
beam headlights come on for approxi-
mately thirty seconds.
This action may be carried out no more
than four times for a maximum lighting
period of two minutes.
To switch off the lights before they
go out automatically, turn the end of
stalk 1, then return it to position 0.
1.59