Maintenance - REMEHA Avanta 12v Installation & Service Manual

230 V
1
fig. 54 Open the boiler
2
1
59970LTGBW7H038
3.2

Maintenance

To conduct maintenance:

Ensure that a service gasket set and new ignition/ionisation
electrode is available before carrying out this procedure.

• Isolate power supply at the fused spur before carrying out
any work on the boiler.
1. Open the boiler
• Isolate the 230 V supply at the switched spur and remove
the fuse
• Isolate the gas supply at the boiler gas valve
• Remove the front panel - release the two screws at the bot-
tom of the front panel, pull the bottom of the panel towards
you from the centre, making sure that the plastic catch is
released from the central display.
42
Remeha Avanta