Connecting A Pc/Pda; Connecting An External Pump - REMEHA Avanta 12v Installation & Service Manual

fig. 28 X10 socket connector
Terminal
Block X4
1 - Neutral
System pump
2 - Live
3
4
fig. 29 Connecting external pump
X10
LTALW7H000035
X4
E
59970LTGBW7H043
2.7.11

Connecting a PC/PDA

Using the optional Recom interface package a PC or PDA can
be connected to the X10 "telephone connector". Using the
Recom PDA service software you can load, change and down-
load various boiler settings and readings. See the user instruc-
tions supplied with the software/hardware.

Not all PDA will run the Recom software - check with Broag
before buying a unit.
2.8

Connecting an external pump

Connect the system pump to terminal X4 (X4 -1 and X4 -2)
of the control unit. The pump's earth connection must be con-
nected to the control unit's earth connection with an AMP-con-
nector (supplied with boiler). The cable must be fed through
the boiler's casing by means of the supplied cable gland and
run trough the cable clamp on the right-hand inside of the
boiler.
24
Remeha Avanta