Specifying What To Display On The Screen For A Send Operation - Canon imageRUNNER 1750i Facsimile Manual

Specifying What to Display on the Screen for a Send
Operation
This mode enables you to specify what screen is displayed first for a send
operation. You can select the desired screen from the One-touch screen, Favorites
Buttons screen, or top screen (Send). The specified screen is displayed when:
•
• The power is turned ON
• The Auto Clear mode is activated
NOTE
The default setting is 'Initial Function'.
1
Press
[TX Settings] under <Common Settings>.
For help, see steps 1 to 3 in "Specifying the Data Compression Ratio for Sending Color
Documents," on p. 7-2.
2
7
3
7-20
Transmission Related Items
(SEND) or (Reset) is pressed
(Additional Functions) ➞ [Communications Settings] ➞
Press [▼] or [▲] until [Default
Screen for Send] appears ➞
press [Default Screen for Send].
Select [Favorites Buttons],
[One-touch Buttons], or [Initial
Function] ➞ press [OK].