3
4
NOTE
• For instructions on how to enter characters, see Chapter 2, "Basic Operations," in the
Reference Guide.
• To delete all of the entered characters, press
5
Press
(Reset) to return to the top screen.
Press [Unit Name].
Enter the unit name (up to 24
characters) using the on-screen
keyboard ➞ press [OK].
IMPORTANT
If the Language Switch setting is set to
'On', some characters are restricted
and cannot be entered. To enter all
characters, set the Language Switch
setting to 'Off'. (See Chapter 3,
"Configuring the Machine's Basic
Settings," in the Reference Guide.)
(Clear).
Before Using Send and Fax Functions
1
1-13