Canon imageRUNNER 1750i Facsimile Manual page 157

NOTE
The destinations you can specify may vary depending on the settings under <Send
Restriction Settings>. (See Chapter 4, "Customizing Settings," in the Remote UI
Guide.) For example, if E-mail Send is set to 'Do not allow' or 'Only allow sending to
own address', the buttons containing e-mail addresses or I-fax addresses are not
displayed.
3
4
4
NOTE
• You can manually change the recalled settings and destinations before you send your
documents.
• To cancel the recalled settings and destinations, press
• If multiple destinations are stored in memory, the destinations may not be listed in the
order in which they were set.
5
Press
NOTE
• If the settings under <Authentication Method> in <SMTP Authentication Settings> are
configured to display an authentication screen, the Enter Network Password screen
appears when you press
"Customizing Settings," in the Remote UI Guide.) Specify the user name and
password ➞ press [OK].
4-52
Job Recall
(Start) to send documents.
(Start) to send e-mails or I-faxes. (See Chapter 4,
Confirm the settings.
If there are more settings than are currently
displayed, you can scroll the screen by
pressing [ ] or [ ].
Press [OK].
The display returns to the top screen.
(Reset).