Canon imageRUNNER 1750i Facsimile Manual page 101

4
NOTE
3
If you adjust the density of the background color, the automatic scan exposure setting
specified in "Adjusting the Density and Image Quality," on p. 3-9 is canceled, and the
original is scanned according to the settings in this step.
5
6
Press
To cancel scanning, press [Cancel] or
If the original is placed on the platen glass, follow the instructions that appear on the
touch panel display ➞ press
complete, press [Done].
The scanned data is sent to the specified destination when scanning is complete.
NOTE
The specified settings return to their defaults after documents are sent. If you want to
keep the settings as the default, see "Registering Frequently Used Scan Settings as
Default (Standard Send Settings)," on p. 7-5.
3-16
Adjusting the Density of Background Color
(Start) to start scanning your originals.
(Start) once for each original. When scanning is
Press [-] or [+] to specify the
amount of each color that you
want to adjust ➞ press [OK].
You can adjust the density of each color by
pressing [-] or [+]. Press [-] to make the
color lighter, or press [+] to make the color
darker.
Press [OK].
NOTE
To cancel the specified settings, press
[Cancel] on the Scan Settings screen
or press (Reset).
(Stop).