Canon imageRUNNER 1750i Facsimile Manual page 165

Hide thumbs Also See for imageRUNNER 1750i:
Table of Contents

Advertisement

• If you specify three or more search criteria, you cannot use both [or] and [and]
together.
• If you press [Simple Search] ➞ [Yes] after specifying search criteria on the Detailed
Search screen, the display changes to the Simple Search screen and the specified
detailed search criteria are deleted.
4
4
IMPORTANT
• Searching for a destination via an LDAP server is not possible if the time setting of the
server and the time setting of the machine are more than five minutes apart. If you
cannot send even when the user name and password are correct, check the time
settings on the server and the machine.
• The number of search results displayed will not exceed the maximum limit set in
Register LDAP Server in System Settings. (See Chapter 3, "Setting up the Machine for
Your Network Environment," in the System Settings Guide.) If the desired destination
is not displayed, either increase the maximum number of addresses to search, or
change the search criteria.
NOTE
• If you press [Start Search] without specifying any search criteria, all of the addresses
stored on the LDAP server are displayed.
• If the Enter Network Password screen is displayed, enter your user name and network
password ➞ press [OK].
• The Enter Network Password screen is displayed if either one of the following is true:
- If <Login Information> in Register LDAP Server in System Settings is set to 'Use' or
- If the user name, password, and domain name specified in Register LDAP Server in
4-60
LDAP Server
'Use (security authent.)', and <Display authentication screen> is set to 'On'. (See
Chapter 3, "Setting up the Machine for Your Network Environment," in the System
Settings Guide.)
System Settings are incorrect. (See Chapter 3, "Setting up the Machine for Your
Network Environment," in the System Settings Guide.)
Press [Start Search].
To cancel searching while the machine is
searching for your criteria, press [Cancel].
If the machine finds some results before
you press [Cancel], these search results
are displayed.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imagerunner 1740iImagerunner 1730i

Table of Contents