● If you select [On] or [For Error Only]:
[On]:
[Off]:
● If you select [Off]:
NOTE
• Even if <Report with TX Image> is set to 'On', the contents of the sent document are
not printed on the report when sending documents in the color mode.
• You cannot print a Multi TX/RX Report with an image of the sent original attached to it
even if <Report With TX Image> is set to 'On'.
6
Press
(Reset) to return to the top screen.
❑
Part of the sent document is printed on the report.
The contents of the sent document are not printed on the report
at all.
❑
Press [On] or [Off] for <Report With TX
Image> ➞ press [OK].
Press [OK].
Printing Communication Reports
8
8-11