Cleanup; Daily Cleaning; Cleaning / Replacement Of The Aircoat Nozzle; Maintenance - WAGNER AC 4500 PROFESSIONAL Translation Of The Original Operating Instructions

GB
5

CLEANUP

Depressurize the spray gun and device before
carrying out cleaning or maintenance work.
Only use cleaning agent recommended by the
manufacturer.
Never spray into a closed container (this would
result in an explosive air/gas mixture).
NOTE: Do not immerse spray gun in solvent.

Daily cleaning

1. Depressurize the spray gun and device.
2. Lock trigger guard.
3. Unscrew nozzle protector and remove air cap.
4. Remove nozzle from air cap and clean separately (see
Cleaning / replacement of the nozzle).
5. Carefully flush spray gun through with suitable
cleaning agent.
6. Depressurize the spray gun and device.
7. Lock trigger guard.
8. Clean gun body with a damp cloth and suitable
cleaning agent. Dry with a cloth.

Cleaning / replacement of the AirCoat nozzle

If the spray pattern becomes uneven, the nozzle or air cap
may need to be cleaned or replaced.
IMPORTANT: DO NOT USE ANY SHARP, METAL OBJECTS
TO CLEAN THE NOZZLE.
1. Depressurize the spray gun and device.
2. Lock trigger guard.
3. Unscrew nozzle protector and remove air cap. (Fig. 8)
4. Press nozzle out of the air cap by hand. Clean parts of
all paint residues with suitable cleaning agent and a
soft brush.
5. Insert the nozzle in the nozzle seal again.
6. Place air cap on nozzle. paying attention to the
flattenings on the nozzle and in the air cap.
7. Screw nozzle protector onto spray gun and tighten by
hand.
6

6

MAINTENANCE

Cleaning / replacement of the filter

1. Depressurize the spray gun and device.
2. Lock trigger guard.
3. Unscrew filter housing by hand and remove. (Fig. 9)
4. Remove the filter.
5. Flush the filter through with cleaning agent or replace
with a new filter.
6. Clean filter housing and material connector with
suitable cleaning agent.
7. Insert cleaned or new filter into the filter housing with
the tapered side in front.
8. Make sure that the spring and seal are inserted and
screw the material connector down tightly again.

AC 4500
Nozzle seal
Air cap
Nozzle protector
Nozzle
Filter housing
Filter
Seal
Spring
Material
connector