Trip 2" Meter - Ducati Multistrada 2200S Pikes Peak Owner's Manual

"Trip 2" meter

1
This function shows the partial distance covered by
the vehicle.
Holding the (1) button pressed for 3 seconds when
this function is displayed resets the trip meter. When
the reading exceeds 999.9, distance traveled is reset
DDA
LAP
and the meter automatically starts counting from 0
GEAR
again. If the system measurement units are changed
at any moment, or if there is an interruption in the
power supply (Battery Off), the distance traveled is
reset and the count starts from zero (considering the
newly set unit of measurement).
The default unit is mi.
Fig 22
50