Helmet Cable - Ducati Multistrada 2200S Pikes Peak Owner's Manual

Helmet cable

Remove the passenger seat and the rider seat as
described in the paragraph "Removal of the seats"
page 188.
Pass the cable (1) through the helmet and insert the
ends of the cable in the frame pin (2).
Leave the helmet hanging and refit the passenger
seat and the rider seat to hold it in place.
Attention
This device protects the helmet against theft
when the motorcycle is parked. Do not leave the
helmet attached when riding the motorcycle; it could
interfere with your movements and cause loss of
control of the motorcycle.
1 2
1
Fig 131
1
Fig 132
191