If the code was entered correctly the message "NEW
PIN" and four dashes "- - - -" will appear on the round
display; now enter the "new" 4 digit code. Entering
the "new" PIN: each time you press the button (2)
the displayed number increases from "0" to "9" and
then returns to "0".
To confirm the number, press the reset button (4).
Repeat the procedure until inserting the fourth digit.
Press the reset button (4) again to confirm.
"OK" and "EXIT" will appear on the display.
To confirm the PIN that was entered, press the reset
button (4) again showing "OK".
"NEW PIN MEM" will appear on the display for 3
seconds to confirm that the PIN was stored.
At the end of the 3 seconds, the instrument panel
exits automatically from the display and returns to the
"setting" menu.
The PIN CODE modification procedure is complete.
Note
There is no limit to the amount of times you can
change your PIN CODE.
144