The pair of barriers
(reference 85114-01)
Installing the pair of barriers
1
1. Unscrew the screw.
2. Insert the pair of barriers.
Approach the barriers to obtain a spacing
of 25 mm beteween the barriers and the
upholstery.
3. Tighten the screw.
Caution
25 mm (acceptable spacing indicated by ISO 13852 : 1996 norm).
CB
Caution
Ensure the side rails are correctly locked in position before use.
22
2
Take hold of the upper part, and lift
it to its maximum height until it clicks
into place.
Hold the rail with one hand, and
activate the lever (CB) to unlock the
system with the other hand, then
guide it down to its lowest position.
3
Using the pair of barriers
To raise the pair of barriers
To lower the pair of barriers
User's Guide