Clamps
(Standard for models 2060-10, 2064-10, 2060-30 and 2064-30)
(only accessoires for models 2065-10 and 2065-30) (reference 25351)
x2
Installing the Clamps
On each side :
1x D117300
2x VXM02
2x ECX4008
2x RDN0008
V
Clamps
(reference 166)
V
User's Guide
Clamp
Screw TH x20
Safety nut D.8
Grey nut cover D.8
Tighten the screws before use.
B
Using the Clamps
Loosen the nuts (V) and Installing the accessories.
Tighten the nuts.
The clamps accept accessories with Ø 16 and Ø 18.
Installing the Clamps
Take the stopper (B) out of the square tube if
necessary. Loosen the nuts (V), and put the
pair of clamps ref.166 (E) into position in the
square tubes. Tighten the nuts.
The clamps accept accessories with Ø 16
(only).
E
1