The Pair Of Barriers; Installing The Pair Of Barriers; Using The Pair Of Barriers - promotal Quest 2050-10 User Manual

The pair of barriers

(reference 85114-01)

Installing the pair of barriers

1. Unscrew the screw.
2. Insert the pair of barriers. Approach the barriers to
obtain a spacing of 25 mm beteween the barriers and
the upholstery.

Using the pair of barriers

To raise the pair of barriers
Take hold of the upper part, and lift it to its
maximum height until it clicks into place.
To lower the pair of barriers
Hold the rail with one hand, and activate the lever
(CB) to unlock the system with the other hand, then
guide it down to its lowest position.
Ensure the side rails are correctly
locked in position before use.
User's Guide
1
2
3. Tighten the screw.
3
CB
23