Oracle Solaris Configuration Worksheet - Sun Oracle X3-2 Installation Manual

Oracle Solaris Configuration Worksheet

Before you begin configuring the operating system, use the configuration worksheet
in the following table to gather the information that you will need. You need to
collect only the information that applies to your application of the system.
Worksheet for Oracle Solaris Operating System Configuration
TABLE:
Information for Installation
Language
Locale
Terminal
Network connection
DHCP
If you are not IP address
using DHCP,
note the network
address:
Subnet
IPv6
Host name
Kerberos
Description or Example
Select from the list of available languages
for the OS.
Select your geographic region from the list
of available locales.
Select the type of terminal that you are
using from the list of available terminal
types.
Is the system connected to a network?
Can the system use Dynamic Host
Configuration Protocol (DHCP) to configure
its network interfaces?
If you are not using DHCP, supply the IP
address for the system.
Example: 192.0.2.1
If you are not using DHCP, is the system
part of a subnet?
If yes, what is the netmask of the subnet?
Example: 10.255.255.255
Do you want to enable IPv6 on this
machine?
Choose a host name for the system.
Do you want to configure Kerberos security
on this machine?
If yes, gather this information:
Default realm:
Administration server:
First KDC:
(Optional) Additional KDCs:
Configuring the Preinstalled Oracle Solaris 11 Operating System
Your Answers:
Defaults (*)
English*
• Networked
• Non-networked*
• Yes
• No*
• Yes
• No*
• Yes
• No*
131