Exit Screen; Entering The Uefi Boot Manager - Dell DX6000 Hardware Owner's Manual

Option
NMI Button
(Disabled default)
AC Power Recovery
(Last default)
AC Power Recovery Delay Determines when the system restarts after power is

Exit Screen

Press <Esc> to exit the System Setup program; the Exit screen displays:
•
Save Changes and Exit
•
Discard Changes and Exit
•
Return to Setup

Entering the UEFI Boot Manager

NOTE:
Operating systems must be 64-bit UEFI-compatible (for example, Microsoft
Windows Server 2008 x64 version) to be installed from the UEFI boot mode. DOS and
32-bit operating systems can only be installed from the BIOS boot mode.
NOTE:
The Boot Mode must be set to UEFI in the System Setup program to access
the UEFI Boot Manager.
The UEFI Boot Manager enables you to:
• Add, delete, and arrange boot options
• Access the System Setup program and BIOS-level boot options without
rebooting
70
Using the System Setup Program and UEFI Boot Manager
Description
CAUTION:
Use the NMI button only if directed to do
so by qualified support personnel or by the operating
system's documentation. Pressing this button
halts the operating system and displays a
diagnostic screen.
Enables or disables the NMI feature.
Determines how the system reacts when power is
restored. If set to Last, the system returns to the last
power state. On turns on the system after power is
restored. Off allows the system to remain off after power
is restored.
restored. Options are Immediate, Random (a random
value of 30 to 240 seconds), or a user-defined value of 30
to 240 seconds.