Load Default Settings; Supervisor Password - ECS GF7100PVT-M3 Manual

40
PCIE Spread Spectrum (Disabled)
This item, when enabled, can significantly reduce the EMI (Electromagnetic Inter-
ference) generated by the PCIE.
DIMM Voltage Control (1.90V)
This item is used to control the voltage of the DIMM.
NB Voltage Control (1.375V)
Use this item to adjust the Northbridge voltage.
Press <Esc> to return to the main menu setting page.

Load Default Settings

This option opens a dialog box that lets you install stability-oriented defaults for
all appropriate items in the Setup Utility. Select <OK> and then press <Enter> to
install the defaults. Select <Cancel> and then press <Enter> to not install the
defaults.

Supervisor Password

This page helps you install or change a password.
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
Supervisor Password
Change Supervisor Password
Supervisor Password (Not Installed)
This item indicates whether a supervisor password has been set. If the password has
been installed, Installed displays. If not, Not Installed displays.
Change Supervisor Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the
sub menu to change the supervisor password.
Press <Esc> to return to the main menu setting page.
Supervisor Password
:Not Installed
Press Enter
: Move Enter : Select
+/-/: Value F10: Save
F1:General Help F9: Optimized Defaults
Using BIOS
Help Item
Install or Change the
password.
ESC: Exit