Activating The Device And Verifying Operation - Nonin GO2 Achieve User Manual

NOTE: Correct positioning of the device on your finger is critical for accurate measurements.
While on the finger, do not press the GO
or hold it together. The internal spring provides the correct pressure; additional pressure may
cause inaccurate readings.
11
7077-000-02.indd 11-12
Achieve against any surface and do not squeeze
2

Activating the Device and Verifying Operation

The GO Achieve automatically turns on when a finger is inserted. When a finger is
2
inserted, the GO Achieve performs a brief self test, as shown below. Verify that all
2
segments of the LCD (Liquid Crystal Display) appear during the startup sequence.
The GO Achieve LCD has an integrated backlight that turns on automatically in low light
2
conditions. This allows the display to be visible in dark spaces.
12
11/18/2009 2:20:18 PM