•
Radios and cell phones or similar devices may affect the GO
at least 7 feet away from the device.
•
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast towers
and TV broadcast towers may affect accuracy.
•
Use in emergency vehicles with communication systems may affect accuracy.
•
Functional tester cannot be used to assess the accuracy of this pulse oximeter.
•
Follow local disposal and recycling laws for the GO
including the battery.
•
The GO
Achieve is a precision electronic instrument and must be repaired by Nonin
2
Technical Service.
7
7077-000-02.indd 7-8
Achieve and should be kept
2
Achieve and its components,
2
Installing the Battery
One 1.5 volt AAA-size (LR03) battery powers the GO
measurements. Nonin recommends using alkaline batteries (one is included with
each new GO
Achieve). NOTE: You may use rechargeable batteries; however, they may
2
require more frequent replacement.
1. Remove the battery door located on the left side of the GO
towards you.
2. Insert one new 1.5 volt AAA-size battery. Follow the plus (+) and minus (-) markings
for battery direction (as shown inside of the battery compartment).
Achieve for approximately 2400
2
Achieve by sliding it
2
8
11/18/2009 2:20:17 PM