Menu Level 4: Default Setting - Waeco Coolair SP-900 Installation Manual

Configuration
6.5

Menu level 4: Default setting

You can reset the parameters you set in configuration mode at menu
levels 1 to 3 to the default settings:
➤ Start configuration mode (see chapter "Starting and ending configura-
tion mode" on page 43).
✓ The first digit of the display (fig. 18, 9) shows the menu level and the
second and third show the parameter which can be set.
➤ Press the Temp. + button (fig. 18, 4) three times to switch to
menu level 4.
✓ The digital display shows
➤ Press the Mode + button (fig. 18, 8) to change the parameter.
✓ The
–
➤ Press the Temp. + button (fig. 18, 4).
✓ The digital display shows
➤ Press the Mode + button (fig. 18, 8) to confirm your entry.
✓ The parameters set in configuration mode are reset to the default setting.
✓ You are now in menu level 4 and can use the Temp. + and - buttons
(fig. 18, 4 and 5) to switch between menu levels.
46
digits flash in the display.
.
00
.
01
CoolAir