Table of Contents
Advertisement
SP-900
DE
11
LKW-Splitklimaanlage
Einbauanleitung
EN
30
HGV split air conditioner
Installation manual
FR
49
Climatiseur split pour poids lourds
Notice de montage
ES
68
Equipo de aire acondicionado Split para
camiones
Instrucciones de instalación
IT
87
Impianto di climatizzazione split per
autocarri
Istruzioni di montaggio
NL
107 Split airconditioning voor vrachtwagens
Montagehandleiding
DA 126 Splitklimaanlæg til lastbiler
Installationsvejledning
SV
145 Split-klimatanläggning för lastbilar
Monteringsanvisning
NO 164 Delt klimaanlegg for lastebiler
Montasjeveiledning
FIN 182 Kuorma-auton ilmastointilaite
Asennusohje
Advertisement
Table of Contents
Related Manuals for Waeco Coolair SP-900
Summary of Contents for Waeco Coolair SP-900
- Page 1 SP-900 LKW-Splitklimaanlage 107 Split airconditioning voor vrachtwagens Einbauanleitung Montagehandleiding HGV split air conditioner DA 126 Splitklimaanlæg til lastbiler Installation manual Installationsvejledning Climatiseur split pour poids lourds 145 Split-klimatanläggning för lastbilar Notice de montage Monteringsanvisning Equipo de aire acondicionado Split para...
- Page 2 CoolAir...
- Page 3 CoolAir...
- Page 4 CoolAir...
- Page 5 CoolAir...
- Page 6 CoolAir...
- Page 7 CoolAir...
- Page 8 CoolAir sw ro ro + 4441300097 4441300096 4441300108 Blau Braun Gelb Grün Schwarz Weiss Blue Brown Yellow Green Black White Azul Marrón Amarillo Verde Rojo Negro Blanco Bleu Marron Jaune Vert Rouge Noir Blanc Marrone Giallo Verde Rosso Nero Bianco Blauw Bruin Geel...
- Page 9 CoolAir...
-
Page 10: Table Of Contents
Safety instructions CoolAir Contents 1 Safety instructions........... .30 1.1 Using the device . -
Page 11: Using The Device
Safety instructions CoolAir Using the device Only use the air conditioner for the purpose specified by the manufacturer and do not make any alterations or structural changes to the device. Only operate the air conditioner if you are certain that the housing and the cables are not damaged. -
Page 12: Conventions In This Manual
The manufacturer assumes no liability for non-observance of this installation manual. Any claims are excluded in this case. The operating manual for the CoolAir SP-900 is included in the air condi- tioner's scope of delivery. Target group... -
Page 13: Proper Use
Supplementary information on the product. Proper use The CoolAir SP-900 is for supplying the cab of a lorry with cooled and dehumidified air. It can be used while driving. Caution The CoolAir SP-900 is not suitable for installation in agricultural machines and construction machines or similar equipment. -
Page 14: Scope Of Delivery
Scope of delivery CoolAir Scope of delivery CoolAir SP-900 Part designation Quantity Item no. CoolAir SP-900 air conditioning unit 9100100002 consisting of: - Condenser unit 4442700183 - Evaporator unit with connection line 4442700184 Remote control (incl. type CR2025 battery) 4441600084... -
Page 15: Notes On Installation
The supplied assembly parts must not be modified during installation. If a WAECO fastening frame is not used to install the system, make sure that the installation position of the condenser unit on the rear panel is not too low. -
Page 16: Installation Steps
Installation CoolAir Installation steps Caution The manufacturer only assumes liability for parts included in the scope of delivery. The validity of the warranty expires if the system is installed together with third-party parts. 5.3.1 Determining the installation position The system's installation position must meet the following criteria: The installation position must be chosen so that maintenance work can be performed without difficulties and so that there is sufficient space for the add-on parts (refrigerant line). -
Page 17: Installing The Condenser Unit
Installation CoolAir 5.3.2 Installing the condenser unit To install the condenser unit using a vehicle-specific WAECO fastening frame, please observe the instructions included in the frame's scope of delivery. The following work steps describe the installation of the con- denser unit without vehicle-specific fastening frame. -
Page 18: Installing The Evaporator Unit
Installation CoolAir 5.3.3 Installing the evaporator unit The evaporator unit is fitted on the vertical rear panel, near the bunk, in a horizontal position: ➤ Remove the panelling from the evaporator unit (see Fig. 6 on page 5). ➤ Find a suitable fastening position in the cab that allows sufficient air circulation. -
Page 19: Connecting The Condenser Unit To The Evaporator Unit
Installation CoolAir 5.3.4 Connecting the condenser unit to the evaporator unit Caution Avoid narrow radii during bending. Use a suitable round object as a bending aid. If the radius is too narrow, the refrigerant line will be kinked and the air conditioner would not be ready for operation. Caution Before fastening the connection couplings, make sure that the sealing and thread faces are absolutely clean. - Page 20 Installation CoolAir The connection lines should be installed at right angles to the rear panel of the lorry (see Fig. 12 on page 7). For this purpose, use body adhesive (e.g. Betalink K1) and a self-tapping screw to fasten the holders (see Fig. 13 on page 7).
-
Page 21: Installing And Connecting The Power Cable
➤ Insert the plug of the power cable in the socket of the roof air conditioner. ➤ Use a cable tie to protect the power cable from rubbing and damage. ➤ After completing the installation, switch on the CoolAir SP-900 and check the start of the compressor. -
Page 22: Sealing And Attaching The Cover
Installation CoolAir Check the voltage drop between the vehicle connection and the cable connector on the compressor. The voltage drop must not exceed 0.5 V. ➤ Use the previously removed hex screws to fasten the housing of the condenser unit. 5.3.6 Sealing and attaching the cover ➤... -
Page 23: Configuration
Configuration CoolAir Configuration Before you first start up the system, you can adapt the controls according to the installation conditions. This must be done by the person installing the system. In configuration mode, the following system software parameters must be set at the control panel (see Fig. -
Page 24: Menu Level 1: Set Temperature
Configuration CoolAir Menu level 1: Set temperature The system always starts with a defined value for the room temperature. This parameter can be configured between 17 and 30 °C: ➤ Start configuration mode (see chapter “Starting and ending configura- tion mode” on page 43). ✓... -
Page 25: Menu Level 3: Operating Mode
Configuration CoolAir ➤ Use the Temp. + and - buttons (fig. 184 or 5) to select the low voltage cut-off value. The characteristic figures at second and third place on the digital display represent the voltage (V) at which the system is shut down: Charac- Charac-... -
Page 26: Menu Level 4: Default Setting
Configuration CoolAir Menu level 4: Default setting You can reset the parameters you set in configuration mode at menu levels 1 to 3 to the default settings: ➤ Start configuration mode (see chapter “Starting and ending configura- tion mode” on page 43). ✓... -
Page 27: Maintenance And Care
Maintenance and care CoolAir Maintenance and care Caution Do not use abrasive cleaning agents or hard objects during cleaning as these can damage the device. Condenser unit ➤ Clean the condenser unit at least once every season, ideally at the beginning of the season. -
Page 28: Technical Data
Technical data CoolAir Technical data CoolAir SP-900 air conditioner Item number 9100100002 Cooling capacity: 900 W Rated input voltage: 24 V DC Input voltage range: 20 V DC – 30 V DC Operating temperature range: 0 – 43 °C Current consumption: 12 –... - Page 29 Dometic WAECO International GmbH · Hollefeldstraße 63 · D-48282 Emsdetten ℡ +49 (0) 2572 879-195 · +49 (0) 2572 879-322 · Mail: info@dometic-waeco.de · Internet: www.dometic-waeco.de Europe Overseas + Middle East Dometic Austria GmbH Dometic Italy S.p.A. WAECO Pacific Pty. Ltd.
Need help?
Do you have a question about the Coolair SP-900 and is the answer not in the manual?
Questions and answers