BA_CA850S_SP950.book Seite 22 Mittwoch, 2. Mai 2012 5:05 17 Notes on using the manual Please read this instruction manual carefully before starting the product and keep it in a safe place for future reference. If you pass on the product to another person, hand over this operating manual along with it.
BA_CA850S_SP950.book Seite 23 Mittwoch, 2. Mai 2012 5:05 17 Safety instructions This symbol describes the result of an action. fig. 1 5, page 3: This refers to an element in an illustration. In this case, item 5 in figure 1 on page 3. Please observe the following safety instructions.
BA_CA850S_SP950.book Seite 24 Mittwoch, 2. Mai 2012 5:05 17 Safety instructions Do not use the stationary air conditioner near flammable fluids and gases. Switch the stationary air conditioner off before tilting the cab for maintenance. Do not operate the stationary air conditioner if the ambient temperature is below 0 °C.
BA_CA850S_SP950.book Seite 25 Mittwoch, 2. Mai 2012 5:05 17 Intended use Intended use The stationary air conditioner is used to supply the interior of the driver's cab with cool and dehumidified air. The system is designed for stationary use. It can be used while driving.
BA_CA850S_SP950.book Seite 26 Mittwoch, 2. Mai 2012 5:05 17 Operation The refrigerant circuit of the stationary air conditioner consists of four main components: Compressor The compressor draws in the R134a refrigerant and compresses it. This raises the pressure and therefore the temperature of the refrigerant. Condenser The built-in condenser works like a cooler or heat exchanger.
BA_CA850S_SP950.book Seite 27 Mittwoch, 2. Mai 2012 5:05 17 Operation Control panel The following control and display elements are available on the control panel for operating the system: No. in fig. 2, Meaning page 3 ON/OFF button Fault LED (red): The LED indicates system malfunctions.
BA_CA850S_SP950.book Seite 28 Mittwoch, 2. Mai 2012 5:05 17 Using the stationary air conditioner Remote control The remote control is equipped with the following control elements for operating the system: No. in fig. 3, Meaning page 4 STANDBY button The system can be switched between active and standby modes.
Page 11
They can be used while driving, do not how- ever replace the engine-powered vehicle air conditioning system. Observe the following instructions for use to ensure your WAECO CoolAir stationary air conditioner is used efficiently: It is recommended that you: Park your vehicle in the shade when possible.
Page 12
BA_CA850S_SP950.book Seite 30 Mittwoch, 2. Mai 2012 5:05 17 Using the stationary air conditioner Switching on the stationary air conditioner Caution Never close all of the air nozzles of the stationary air conditioner simultaneously. The device would ice up inside. Note The first time the stationary air conditioner is used, there may be a slight smell.
BA_CA850S_SP950.book Seite 31 Mittwoch, 2. Mai 2012 5:05 17 Using the stationary air conditioner Selecting the temperature You can select temperatures between 17 °C and 30 °C. ® Press + or – (fig. 2 6/7, page 3) on the control panel or + or – (fig.
Page 14
BA_CA850S_SP950.book Seite 32 Mittwoch, 2. Mai 2012 5:05 17 Using the stationary air conditioner Extracting condensation (SP950 only) The condensated water which accumulates due to the way the system works is automatically extracted at intervals during operation. You can pump out the condensated water manually when necessary: ®...
Page 15
BA_CA850S_SP950.book Seite 33 Mittwoch, 2. Mai 2012 5:05 17 Using the stationary air conditioner Note You can only use the remote control to switch the stationary air conditioner in and out of standby mode. SP950 ® Switching to standby mode: With the unit switched on, briefly press the ON/OFF (fig.
BA_CA850S_SP950.book Seite 34 Mittwoch, 2. Mai 2012 5:05 17 Display messages Display messages Note When you start the vehicle or switch on several consumers at once, the display text may briefly appear. Control panel warnings The system control unit has various functions for protecting the device and the battery.
BA_CA850S_SP950.book Seite 35 Mittwoch, 2. Mai 2012 5:05 17 Display messages Control panel fault messages The “Fault” LED (fig. 2 2, page 3) lights up if there is a fault with the station- ary air conditioner. The type of error is shown on the display by the following error codes: Display Description...
BA_CA850S_SP950.book Seite 36 Mittwoch, 2. Mai 2012 5:05 17 Maintenance and care Maintenance and care Please observe the following tips for the maintenance and care of your stationary air conditioner. Caution Do not use abrasive cleaning agents or hard objects during clean- ing as these can damage the unit.
BA_CA850S_SP950.book Seite 37 Mittwoch, 2. Mai 2012 5:05 17 Disposal Disposal ® Place the packaging material in the appropriate recycling waste bins wherever possible. If you wish to finally dispose of the product, ask your local recycling centre or specialist dealer for details about how to do this in accordance with the applicable disposal regulations.
BA_CA850S_SP950.book Seite 38 Mittwoch, 2. Mai 2012 5:05 17 Technical data Technical data Stationary air conditioner CoolAir CA850S Cooling capacity: 850 W Voltage: 24 V DC (20 V DC – 30 V DC) Current consumption: 12 – 22 A Operating temperature range: 0 –...