Proper Use - Waeco Coolair SP-900 Installation Manual

CoolAir
a
The safety instruction indicates potential hazards which could arise during
the installation or operation of the product and cause damage to the de-
vice or environmental or economic damage.
I
Supplementary information on the product.
3

Proper use

The CoolAir SP-900 is for supplying the cab of a lorry with cooled and
dehumidified air. It can be used while driving.
a
Caution
The CoolAir SP-900 is not suitable for installation in agricultural machines
and construction machines or similar equipment. It does not work properly
in the event of strong vibrations and exposure to dust.
a
Caution
Operating the SP-900 air conditioner with voltages other than those speci-
fied can result in damage to the device.
The SP-900 air conditioner is only designed for ambient temperatures of
up to 43 °C in cooling mode.
The CoolAir SP-900 is ready to install on delivery. The manufacturer
strongly recommends the use of a vehicle-specific WAECO fastening
frame for optimally installing the CoolAir SP-900 condenser unit on the
rear panel of the cab.
Proper use
33