Upgrading 3610 Usb Bridge Firmware - CipherLab 1664 User Manual

4) Read the "Update" barcode for the scanner to resume its operation (exit the
configuration mode).

UPGRADING 3610 USB BRIDGE FIRMWARE

1) Read the following barcodes in sequence for 3610 to enter the download mode. The
Communication LED on 3610 will be flashing red to indicate it is ready for
downloading.
2) Run the download utility "ProgLoad.exe" on your computer.
Kernel Program
K3610Bridge_V*.shx
Enter Setup
Download 3610
USB Bridge Firmware
Appendix I
Update
User Program
STD3610Bridge_V*.shx
For the communication
"RS-232" and the correct COM port for USB
Virtual COM interface.
Ignore the baud rate setting.
For the file option, click [Browse] to select
the target file for firmware update.
Click [OK].
Update
Firmware Upgrade
settings, select
239