Codabar; Start/Stop Transmission; Clsi Conversion - CipherLab 1664 User Manual

1664 Barcode Scanner

4.1 CODABAR

4.1.1 START/STOP TRANSMISSION

Decide whether to include the start/stop characters in the data being transmitted.

4.1.2 CLSI CONVERSION

When enabled, the CLSI editing strips the start/stop characters and inserts a space after
the first, fifth, and tenth characters of a 14-character Codabar barcode.
Note: The 14-character barcode length does not include start/stop characters.
114
User Guide
*Enable
Disable
Transmit Start/Stop
Characters
*Do Not Transmit
Apply CLSI Editing
*Do Not Apply
Enter Setup