Upgrading Firmware - CipherLab 1500 Series User Manual

UPGRADING FIRMWARE

1) Connect the power supply cord from the scanner to a proper power outlet.
2) Connect the serial cable between the scanner and your computer via the RS-232 port.
3) Read the following labels in sequence for the scanner to enter the download mode.
The scanner will respond with beeps to indicate it is ready for downloading.
4) Run the download utility "ProLoad.exe" or "Download.exe" on your computer.
(Download.exe requires version 2.3 or later!)
Open the firmware update "*.shx", and select the correct COM port.
Baud rate
Data bit
Parity
Flow control
5) The scanner will automatically restart itself when upgrading firmware is completed
successfully.
Enter Setup
Download
– 115,200 bps
– 8
– None
– None
Appendix IV
Update
133