ProCurve 2610 Manual page 73

Syntax: aaa port-access web-based < port-list > [max-requests <1-10>]
Specifies the number of authentication attempts that
must time-out before authentication fails.
(Default: 2)
Syntax: aaa port-access web-based < port-list > [max-retries <1-10>]
Specifies the number of the number of times a client
can enter their user name and password before authen­
tication fails. This allows the reentry of the user name
and password if necessary.
(Default: 3)
Syntax: aaa port-access web-based < port-list > [quiet-period <1 - 65535>]
Specifies the time period, in seconds, the switch should
wait before attempting an authentication request for
a client that failed authentication.
(Default: 60 seconds)
Syntax: aaa port-access web-based < port-list > [reauth-period <0 - 9999999>]
Specifies the time period, in seconds, the switch
enforces on a client to re-authenticate. When set to 0,
reauthentication is disabled. (Default: 300 seconds)
Syntax: aaa port-access web-based < port-list > [reauthenticate]
Forces a reauthentication of all attached clients on the
port.
Web and MAC Authentication
Configuring Web Authentication
3-21