Display The Content Of All Acls On The Switch - ProCurve 2610 Manual

ProCurve(config)# show access-list
Access Control Lists
Type Appl Name
---- ---- -----------------------------
ext yes 110
ext yes 120
ext yes 150
std yes 50
std yes 60
Figure 9-19. Example of a Summary Table of Access Lists
Term Meaning
Type Shows whether the listed ACL is
(Extended; protocol, source, and destination data).
Appl Shows whether the listed ACL has been applied to an interface (
Name Shows the name or ID number assigned to each ACL configured in the switch.

Display the Content of All ACLs on the Switch

This command lists the configuration details for every ACL configured in the
running-config file, regardless of whether you have assigned any to filter traffic
on switch interfaces.
Syntax: show access-list config
List the configured syntax for all ACLs currently configured
on the switch.
Access Control Lists (ACLs)
Displaying ACL Data
std
(Standard; source-address only) or
ext
yes/no
).
9-55