ProCurve 2610 Manual page 205

N o t e o n P u b l i c
K e ys
3. Copy the client-public-key file into a TFTP server accessible to the switch.
Copying a client-public-key into the switch requires the following:
■ One or more client-generated public keys. Refer to the documentation
provided with your SSH client application.
A copy of each client public key (up to ten) stored in a single text file
■
or individual on a TFTP server to which the switch has access.
Terminate all client public-keys in the file except the last one with a
<CR><LF>.
The actual content of a public key entry in a public key file is determined by
the SSH client application generating the key. (Although you can manually
add or edit any comments the client application adds to the end of the key,
such as the smith@fellow at the end of the key in figure 7-14 on page 7-23.)
Syntax: copy tftp pub-key-file <ip-address> <filename>
Copies a public key file from a TFTP server into flash
memory in the switch.
show crypto client-public-key [babble | fingerprint]
Displays the client public key(s) in the switch's current
client-public-key file.
The babble option converts the key data to phonetic
hashes that are easier for visual comparisons.
The fingerprint option converts the key data to phonetic
hashes that are for the same purpose.
Further Information on SSH Client Public-Key Authentication
Configuring Secure Shell (SSH)
7-25