ProCurve 2610 Manual page 177

Yes: An ACL has been assigned by a RADIUS server to inbound traffic on the indicated
port for a currently active, authenticated client session. This assignment remains
active until the session ends.
No: There is no dynamic port ACL currently active on the indicated port.
ProCurve (config)# show port-access authenticator 1-10
Port Access Authenticator Status
Port-access authenticator activated [No] : No
Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No
Port Status VLAN ID
---- ------ -------- ----------- -----------
1
2
3
Figure 6-7. Example of Output Showing Current RADIUS-Applied Features
Configuring RADIUS Server Support for Switch Services
Configuring and Using RADIUS-Assigned Access Control Lists
Current Current
Port COS
Open 1 7
Closed 1 No-override No
Open 1 No-override Yes
RADIUS ACL
Applied?
Yes
6-23